For sealing flanges and surfaces with a large gap up to max. 0.5 mm. Replacement for solid seals. For sealing flanges and surfaces with a large gap up to max. 0.5 mm. Replacement for solid seals. High degree of gap bridging Completely fills extensive surface roughnesses 100 % seal Gaps are completely filled so that the resulting bonding provides protection against corrosion caused by friction and protection against rust. Medium strength Removable Slight flexibility Compensates expansion difference between different materials The accordion bottle makes it easy to empty residual product Resistant to a large number of bases, gases, solvents, oils and fuels Silicone-free, solvent-free and oil-free Proof of Performance NSF registered, Class S2, sealants - no direct contact with food NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water Notice The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces. Weight of content 50 g Chemical basis Dimethacrylic acid ester Fully hardening/curing conditions Exclusion of oxygen and contact with metal (copper or iron ions) Colour Orange fluorescent Min./max. viscosity 1 /conditions 1 100000-180000 mPas / at 25C, Brookfield RVT, spindle 6/2.5 rpm Density/conditions 1.05 g/cm / in accordance with DIN EN ISO 2811-1 Min./max. initial strength 10-20 min Min./max. functional strength 3-6 h Min./max. final strength 6 h-24 h Min./max. processing temperature 5 to 35 C Min./max. temperature conditions -55 to 150 C Min. flashing point 100 C Min. prevail torque 2 Nm Conditions for prevail torque DIN EN 15865 Min./max. compressive shearing strength /conditions 5-10 N/mm / in accordance with ISO 10123 Min. breakaway torque 8 Nm Breakaway torque conditions DIN EN 15865 Shelf life from production/conditions 18 Month / at room temperature Silicone-free Yes Solvent-free Yes