New, old stock, unused and in original box. Rexroth Ceram Single Solenoid Valve Specified by industries that demand tough valves due to their harsh operating environment. Ceram valves are very prevalent in industries where ordinary valves just don’t last. Industries such as: tire plants, foundries, paper mills, steel plants, concrete batch plants, sawmills, plywood and board plants, automotive assembly, glass manufacturers, rubber and plastics, sheet metal fabrication, etc. Summary of Specifications For Ceram Valves 5 Port / 2 Position Single Solenoid, Metal Spring Return Subbase Mounted (ISO Standard 5599/1) TECHNICAL DATA: Port Sizes: 1/4" - 3/8" ISO Size I, 3/8" - 1/2" ISO Size II 1/2" - 3/4” ISO Size III, 1" ISO Size IV Working Pressure: 0 to 150 psi (0 to 10.3 bar) (Intrinsically Safe versions: Maximum internal pilot valve pressure is 115 psi or 7.9 bar) Vacuum applications: to 24" Hg Pilot Pressure: SIZES I II 29 psi (2.0 bar) minimum, all 2 position valves 44 psi (3.0 bar) minimum, all 3 position valves 150 psi (10.3 bar) maximum (Intrinsically Safe versions: Maximum external pilot pressure is 115 psi or 7.9 bar) SIZES III IV 36 psi (2.5 bar) minimum, all 2 position valve 44 psi (3.0 bar) minimum, all 3 position valve 150 PSI(10.3 bar) maximum (Intrinsically Safe versions: Maximum external pilot pressure is 115 psi or 7.9 bar) Specifications Old Part # GT-010061-02440 ISO Size 1 Voltage 110V-50Hz/120V-60Hz Valve Model Number GT-010061-02440 Flow 1.1 Cv 1100 nL/min Valve Weight 2.15 lb 0.98 kg Single Subbase (Side Ported) R432015488 R432015524 Port Size 1/4"-18 3/8"-18 Subbase Weight 0.76 lb 0.34 kg Working Pressure 0 to 150 psi 0 to 10.3 bar Vacuum Applications 24" Hg Temperature Range +5 to +150 ºF -15 to 66 ºC Media Air, either Lubricated or Non-lubricated Service Life Over 150 million Cycles with or without Line Lubrication Combination Manual Override Locking Non-Locking Type Single Solenoid No. of Ports 5 No. of Positions 2 ISO Standard 5599/1 Dimensions A 5.12 in. 130.0 mm B 1.57 in. 40.0 mm C 1.89 in. 48.0 mm D 0.31 in. 8.0 mm E 1.52 in. 38.5 mm F 4.53 in. 115.1 mm G 3.48 in. 88.5 mm H 1.20 in. 30.5 mm Additional Specifications Flow: Valve Size: I-II-III-IV CV:1.1-2.4-4.3-7500 Nl/min: 1100-2400-4300-7500 Temperature Range: Solenoid Valves: +5ºF to +150ºF (-15ºC to 66ºC) (-10ºF or -12ºC operation possible with low temperature solenoid operators. Available for 2-position double solenoid and air Spring return valves.) Air Pilot Valves: -10ºF to +175ºF (-23ºC to 79ºC) Media: Air, either Lubricated or Non-lubricated Service Life: over 150 million Cycles with or without Line Lubrication Material: Body - Die Cast Anodized Aluminum (Sizes II - IV) Die Cast Zinc (Size I) Valve Elements - Ceramic Slide Plates (AI2O3) Combination Manual Override: Explosion-proof models: Non-locking only Other models: Locking Non-Locking sizes I - IV (III and IV: Oct. ‘92 later) Non-Locking sizes III IV (Prior to Oct. ‘92) Advantages Eliminate Downtime-They Don’t Stick Normal air valves can stick or jam and cause start-up problems because of their inability to handle accumulations of dir, dust, oil or water in air lines. Not with the Ceram valve. There’s no gap between the plates for dirt and oil to accumulate. The plates are finished so precise that they act like sliding magnets or jo blocks. Solenoid operators of the same voltage on standard valves are interchangeable between all sizes, reducing spare parts inventory and downtime. They Work Great in Normal Applications Too Just because they are so popular in harsh environments, don’t think they won’t work great in a more normal application. Ceram Valves Save Air and Money The tight shut-off with Ceram valves eliminates costly loss of air that is common in other designs. Compressed air that you pay for. Extended Life Years of proven field service verifies an anticipated life of 150 million cycles even under adverse conditions. Overcomes Design Limitations of Other Valves Lapped spool valves normally have a small gap between spool and sleeve that is prone to oil and dirt accumulation, resulting in sticking and the waste of air. Packed spool valves using elastomer seals are subject to deterioration and excessive wear when contamination and/or incompatible lubricants are present. World Standard ISO Mounting ISO 5599/1 mounting dimensions mean that wherever you send it, it’s interchangeable with other ISO valves. Four basic valves sizes - ISO 1 through 4 with subbases or manifolds with NPT or ISO G (BSPP) ports. Valve Sizes/Specifications Valve Size Ports NPT, ISO G(BSPP) CV S.C.F.M.* Size 1 1/4", 3/8" 1.1 40 SCFM Size 2 3/8", 1/2" 2.4 86 SCFM Size 3 1/2", 3/4" 4.3 155 SCFM Size 4 3/4", 1" 7.5 269 SCFM *Flow measured with 87 psi (6 bar) supply pressure and 14.5 psi (1 bar) pressure drop across the valve. Features Ceramic plates guaranteed for life of valve Sliding ceramic plates form seal Operates with or without line lubrication Interchangeable with other ISO valves Expected service life exceeds 150 million cycles NEMA 4 Standard Sub-bases and manifolds available 1/4" thru 1" NPT ISO G1/8 to G1 piping Wide range of accessories, including sandwich speed controls and regulators Explosion-proof and intrinsically safe solenoids available. Brad Harrison Connector Solenoids U.L. and C.S.A. approved solenoids