You can make your offer during the checkout process as long as you do not live in a state where marketplace facilitator tax laws exist. Check your state.
You can make your offer during the checkout process as long as you do not live in a state where marketplace facilitator tax laws exist. Check your state.
Plena LBB1990/00Voice Alarm Controller unit. Very heavy unit.
The Plena LBB1990/00Voice Alarm Controller unit, is the heart of the voice alarm system.
It is the basis of the Plena Voice Alarm System, and has all the
essential functionality for compliance with the EN54?16 and EN60849
standards, including full system supervision, loudspeaker line impedance
supervision, a supervised emergency microphone on the front panel and a
supervised message manager.
The LBB1990/00 enables messages to be merged to allow even more
flexible use of pre-recorded announcements and evacuation messages. The
controller can be used as a stand-alone system with up to six zones, or
expanded to up to 120 zones using additional six-zone routers.
Up to eight call stations can be connected. Interconnections are made using standard RJ45 connectors and shielded CAT-5 cable.
A built-in 240 W amplifier provides the power for the emergency call
channel and BGM. Additional Plena Amplifiers can be added to provide
two-channel operation. All amplifiers are supervised. The audio output
uses standard analog audio 100 V line switching for full compatibility
with the Plena family of public address equipment and Bosch
EVAC-compliant loudspeakers. The system is configured using DIP switches
for basic functionality and a PC for more advanced functions.
Basic 6 zone system
Expandable to 120 zones
Up to 8 call stations can be connected
Built-in 240 watt booster amp
Digital message system
Up to 255 pre-recorded messages and chimes/tones can be stored
Emergency mic on front panel (optional)
16 priority levels
Individual BGM control for each zone
Standard and emergency control in and outputs
Additional Booster amps are supervised
Can be set up using PC or via DIP switches
Fully complies with IEC60849 and all national equivalents
SPECIFICATIONS
Mains Power Supply
Voltage
230/115 VAC, 10%, 50/60 Hz
Inrush Current
8A
Max power consumption
600 VA
Voltage
24 VDC, +15% / -15%
Current max
14 A
Output power (rms/maximum)
240W / 360 W
Power reduction on backup power
-1dB
Frequency Response
60 Hz to 18 kHz (+1/-3 dB at -10 dB ref. rated output)
Distortion
1% at rated output power, 1 kHz
Bass control
-8/+8 dB at 100 Hz
Treble control
-8/+8 dB at 10 Hz
Mic/line input
1x
Connector
XLR, 6.3 mm jack
Sensitivity
1 mV (mic), 1 V (line)
Impedance
1 kohm (mic); 5 kohm (line)
S/N (flat at max volume)
63 dB (mic); 70 dB (line)
S/N (flat at min volume/muted)
75dB
CMRR
40 dB (50 Hz - 20 kHz)
Headroom
25 dB
Speech filter
-3 dB at 315 Hz, high-pass, 6 dB/oct
Physical
Dimensions (H x W x D)
144 x 430 x 370 mm (19" wide, 3U high)
Mounting
19? rack
Colour
Charcoal
Weight
Approx 21.17kg
Will be shipped by Air Mail International priority mail.
Thanks for looking
I will ship to Worldwide.
Please contact me for shipping rates to Your country that is not listed in shipping location section and I will send You a shipping price.