G-FORCE manufactures and develops game devices for simulator and game enthusiasts. We produce a limited number of custom devices, it is not a serial production. CP-36S the TOP model of CP serie game control panels with 2x safe cover lock OFF switches. The CP-36S USB Gaming Control Panel is a fully programmable device that allows you to assign functions from your simulator (DCS, MFS…) or others games. You can control the functions with switches and encoders. This control panel is available in the PILOT version for flight simulators and in the UNIVERSAL version for other simulators, or as an additional panel to the flight panel. Both versions have the same controller functions. The “Pilot” version has the design of the Gear and Flaps controls with a description on the label. 28 assignable switches, 2 rotary encoders with push button and 2 encoder allow control of 36 joystick buttons (in basic mode). If your simulator or game supports the mod-switch (DCS) function, you can use the “MODE” rotary switch to control up to 112 buttons and 16 encoders. In an alternative configuration , encoders can be also used to control the axes. All controller functions are fully programmable using the FreeJoyQT configuration software . You can freely map and change the functionality of the controllers according to your needs. Absolute freedom and flexibility will allow each player to set the panel according to their preferences. 2x rotary encoder with push button, 5-position rotary switch, 2x safe cover switch with lock OFF function, 6x momentary toggle switch, 2x locking toggle switch, 2x encoder wheels, 2x push button. Connection to a free PC USB 2.0 or USB 3.0 port. Compatibility with Windows / Plug Play. Adjustable table holder THA1 included. 3D printed plastic parts PLA, PETG / ECO friendly product. Technical parameters: Controls: 28 Buttons + 2 Rotary encoders + 2 Wheels encoders (36 joystick buttons) Engine: 32 Bit processor Connection: PC USB 2.0 or USB 3.0 port Compatibility: Windows 7 or higher Power: USB 5V / 250mA Size: 180x125x75 mm (only panel without holder) Weight: 535g with holder Material: 3D printed EPLA, PETG Package Contents: CP-36S USB Control panel, THA1-V2 adjustable table holder, USB cable, hex keys, english manual. YOU MAY ALSO LIKE .... G-FORCE CP-30A G-FORCE CP-36 G-FORCE CP-36D/36DS G-FORCE SP-35 All information and a complete range of our products can be found on the website www.gforcecontrol.com. G-FORCE YouTube: https://www.youtube.com/@gforcecontrol2 years warranty and after-sales service. NOTE: The warranty cannot be applied for minor defects or visible layers on the surface of 3D printed plastics, if the functionality of the device is not limited by this.