Everbilt 1/4 HP Submersible Sump Pump w/ Tethered Switch The Everbilt 1/4 HP submersible sump pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a tethered float switch requiring an 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection. Aluminum motor housing for efficient motor cooling Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint, higher efficiency using less energy to operate 8.25 ft. cord length Submersible for quiet operation 1-1/2 in. FNPT discharge Semi-open thermoplastic impeller passes 3/8 in. solids Pumps up to 2000 GPH at 10 ft., outperforms the competition Dimensions Product Depth (in.) 6.3 in Product Height (in.) 10.63 in Product Width (in.) 8.27 in Switch-Off Height (in.) 3.94 Switch-On Height (in.) 11.81 Details Amperage (A) 15 Cord Length (ft.) 8.25 Discharge Flow @ 0 ft. (gallons/hour) 2400 Discharge Flow @ 0 ft. (gallons/min) 40 Discharge Flow @ 10 ft. (gallons/hour) 1980 Discharge Flow @ 10 ft. (gallons/min) 33 Discharge Flow @ 15 ft. (gallons/min) 28 Features Bottom/End Suction, Non-Clogging, Self-Priming, Submersible, Thermal Overload Protection Housing Material Aluminum Impeller Material Plastic Maximum Horsepower (hp) 1/4 Maximum Pressure (PSI) 8.66 Maximum Working Temperature (F) 100 Minimum Sump Basin Diameter 18 or More Minimum working temperature (F) 35 Outlet Diameter Connection (in.) 1-1/2 FPT Pack Size 1 Power Type Required AC Product Weight (lb.) 8.49 lb Pump Switch Type Tethered Returnable 30-Day Vertical Lift (ft.) 20 Voltage 115v