SuperCut B111G38H4 Carbide Impregnated and 50 similar items

For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when uncoiled. Wear leather gloves and eye/body protection while using extreme care when uncoiling the blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine. This premium blade was designed with the professional and serious woodworker in mind. It is truly a unique blade featuring many new advances in blade design. Made from the toughest alloys, the teeth are precision ground and razor sharp, not punched or milled like traditional blades. During the manufacture of this blade, the teeth are impregnated with Carbide particles which greatly improve the cutting life of the blade. The teeth also feature a new aggressive tooth design and set. The sides of the blade are polished smooth and the back of the blade is rounded to allow it to feed and turn with less heat and chatter. This blade is manufactured to the industry's highest standards. No less than 30 inspections and tests insure this is the best blade for the discriminating woodworker. The following bandsaw models use 111 inch ( 9 ft. 3 inch, 9' 3" ) bandsaw blades. Grizzly G1538 16"; Sears Craftsman Professional 15?; Rikon 10-325; General International 690-1 (woodworking).