NEW 220VAC Replacement Motor- Lava Simplex and 14 similar items

This is a brand new replacement motor for the original Lava Simplex 18" Caribbean and 16" Adriatic Wave Machines with the rectangular vessel and black end caps. These are NOT for the cylindrical wave machines or any other wave machine. Until now, no replacement motor was available for these machines. This listing is for one 220VAC motor for use overseas in countries like Germany, France, Spain and more.. They are also available in a 220VAC version for proper operation overseas! The 220VAC motors are custom made with the correct RPM for use in Europe. Using a transformer with the original 120VAC North American version of the motor will cause the motor to run slower thus "deflating" the wave performance to the point it doesn't really make waves at all.. Now, you can have a machine that operates properly in Europe. Installation is simple. The original motor is riveted to the metal frame. The rivets must be drilled out or cut off using wire cutters. Then, just cut the original wires after the connectors and use the supplied blue wire nuts to connect the new motor. The bolt the new motor in ensuring to use the extra nuts in the correct position to center the rotating wheel in the opening of the base housing. Finally, I also recommend adding a small piece of matte Scotch tape where the cam wheel contacts the vessel. Done! You will have a motor that will serve you for years to come. If you would like me to perform the installation, this can be done for a small fee in house. Please message me prior to purchase. Please check my other items for restored vintage Lava machines and the all new custom made 22" Hughes Model One Wave Motion Machine. Beware of imitators and those trying to pass of worn out machines that are missing fluids. When you purchase a Hughes brand product, you will receive world class service and a warranty.