Sparkfun Sound Detector Audio Sensing and 40 similar items

Sparkfun Sound Detector Audio Sensing Breakout Three Different Outputs Audio The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independent, so you can use as many or as few as you want at once. The envelope output allows you to easily read amplitude of sound by simply measuring the analog voltage. Gain can be adjusted with a through-hole resistor, to change the threshold of the binary (gate) output pin as well. Check the hookup guide for more information about setting gain. Each of the three output signals is present on the .1" header at the edge of the board. They are active simultaneously. If you aren?t using one in your particular application, simply leave that pin disconnected. VCC: 3.5V to 5.5V. Ideal voltage is 5V. LMV324. This board is compatible with Arduino products as well as other products. Board has Mic and pre-amp, peak detector, Buffer amplifier and schmitt trigger The Sound Detector is a small board that combines a microphone and some processing circuitry. It provides not only an audio output, but also a binary indication of the presence of sound, and an analog representation of it?s amplitude. Gain can be adjusted with a through-hole resistor, to change the threshold of the binary (gate) output pin as well.