UNUSUAL LEFT-DOOR 7-BOTTLE MACHINE Manufactured Between 1959 1962 By Vendorlator MECHANICALS- The fun parts; levers, gears stuff, have been 100% disassembled, cleaned, lubed reassembled. It vends cools perfectly. Every Time! (Temperature is adjustable) The machine holds 56 bottles in the Ready-To-Dispense position. The unit takes many different sizes shapes of bottled beverages. The shelves are adjustable . .Bottled water fits well. Some pop styles fit. (16.9 plastic sometimes don’t work well.) . .Most beer, including long necks fit. . .Conversion kits to sell canned beverages are available, but lower the machine’s value. COIN MECHANISM: It is Coinco S75-9800B With A Coinco 790 Acceptor. Both have been professionally rebuilt. This Coinco combination can be set for anywhere from 15 to $1.55 easily, via switches. It takes Nickels, Dimes Quarters holds Nickels for change. ELECTRICAL- The electrical has been inspected necessary repairs have been completed. The entire machine’s electrical system was tested for operation safety. It passed all tests, including multiple 1,000 volt meg-ohm insulation tests. The machine has been made compatible with GFCI circuits (recommended if outdoors) LIGHTING- The front light has been replaced with a more efficient CFL bulb socket. It Looks Bright Beautiful! . .The original fixture is still in the machine. It does need a transformer, which costs about $8.00. . .We have the original bulb FS-2 starter for you. The vending door light works looks really cool indoors at night The “Use Correct Change” lights are not original. . .The snap-in bulbs are available at any appliance parts supply many hardware stores for about $5.00 . .(7/8” White 120 Volt Snap In) REFRIGERATION- It has been 100% serviced. The system works perfectly. Temperature is adjustable from 32-F to Off A new thermostat service access valves were installed. It was rebuilt using new oil new, fresh refrigerant R-12 to keep the machine as original as possible. With the new access valves, it would be an easy conversion to R-409a, R-414B, R-134a, etc. BODY- You can see that the body needs prep re-painting. Please look closely. The feet are simple -13 bolts. We have them for you. It is temporarily on a wheeled dolly for moving in out. Dolly will be removed for you. VALUE- Beauty is in the eye of the beholder! This machine is a Left-Door 7 Slot (56 bottle) capacity. Don’t confuse it with the Right Door models, which are much more common. We have a copy of an ad from a rebuilding company with a newer machine, converted to cans for 2900.00. (It is more valuable left as-was for bottles.) DIMENSIONS- 25” Wide (25-3/8 With Hinges) 52” Tall. 21-3/8” Front-To-Rear THIS ITEM IS FOR LOCAL PICK-UP OR FEEL FREE TO SEND A PACK-AND -SHIP COMPANY HERE Please contact us for details. Thanks!