Pentek - PCF1-20MB - 20" x 2.5" Mixed Bed and 50 similar items

This Pentek PCF1-20MB water deionization filter cartridge reduces hardness minerals in low flow rate medical, pharmaceutical, cosmetic, and circuit board manufacturing applications. The media is mixed bed (cation and anion) moist spherical bead deionization resin that meets Food and Drug Administration (FDA) standards, and there are polypropylene pre- and post-filters to reduce the possibility of water bypassing the resin. The cartridge has a capacity of 600 grains, an initial pressure drop of 3.4 pounds per square inch (psi) at a recommended flow rate of 0.50 gallons per minute (gpm), and a temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C). This water deionization filter cartridge is used for the demineralization of water used in various industrial processes. Specifications Capacity600 grains Initial pressure drop at 0.50 gpm3.4 psi Temperature range 40 to 100 degrees F (4.4 to 37.8 degrees C) Maximum dimensions (H x W) 20 x 2-2/3 inches (508 x 68 mm) Maximum dimensions (H x W) 20 x 2-2/3 inches (508 x 68 mm) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.