New, old stock, unused and in original box.

 

 

 

Rexroth Ceram Single Solenoid Valve

 

 

 

Specified by industries that demand tough valves due to their harsh operating environment. Ceram™ valves are very prevalent in industries where ordinary valves just don’t last. Industries such as: tire plants, foundries, paper mills, steel plants, concrete batch plants, sawmills, plywood and board plants, automotive assembly, glass manufacturers, rubber and plastics, sheet metal fabrication, etc.

Summary of Specifications For Ceram Valves
5 Port / 2 Position Single Solenoid, Metal Spring Return Subbase Mounted (ISO Standard 5599/1)

TECHNICAL DATA:
Port Sizes:

Working Pressure:

Pilot Pressure:

 

Specifications  

Old Part #

 GT-010061-02440

ISO Size

 1

Voltage

 110V-50Hz/120V-60Hz

Valve Model Number

 GT-010061-02440

Flow

 1.1 Cv
1100 nL/min

Valve Weight

 2.15 lb
0.98 kg

Single Subbase (Side Ported)

 R432015488 
R432015524

Port Size

 1/4"-18 
3/8"-18

Subbase Weight

 0.76 lb
0.34 kg

Working Pressure

 0 to 150 psi
0 to 10.3 bar

Vacuum Applications

 24" Hg

Temperature Range

 +5 to +150 ºF
-15 to 66 ºC

Media

 Air, either Lubricated or Non-lubricated

Service Life

 Over 150 million Cycles with or without Line Lubrication

Combination Manual Override

 Locking & Non-Locking

Type

 Single Solenoid

No. of Ports

 5

No. of Positions

 2

ISO Standard

 5599/1
 
Dimensions  

A

 5.12 in.
130.0 mm

B

 1.57 in.
40.0 mm

C

 1.89 in.
48.0 mm

D

 0.31 in.
8.0 mm

E

 1.52 in.
38.5 mm

F

 4.53 in.
115.1 mm

G

 3.48 in.
88.5 mm

H

 1.20 in.
30.5 mm
 
Additional Specifications  
Flow:
Valve Size: I-II-III-IV
CV:1.1-2.4-4.3-7500
Nl/min: 1100-2400-4300-7500

Temperature Range:
Solenoid Valves: +5ºF to +150ºF (-15ºC to 66ºC)
(-10ºF or -12ºC operation possible with low temperature solenoid operators. Available for 2-position double solenoid and air Spring return valves.)
Air Pilot Valves: -10ºF to +175ºF (-23ºC to 79ºC)

Media: Air, either Lubricated or Non-lubricated

Service Life: over 150 million Cycles with or without Line Lubrication

Material:
Body - Die Cast Anodized Aluminum (Sizes II - IV)
Die Cast Zinc (Size I)
Valve Elements - Ceramic Slide Plates (AI2O3)

Combination Manual Override:
Explosion-proof models: Non-locking only
Other models: Locking & Non-Locking sizes I - IV (III and IV: Oct. ‘92 & later)
Non-Locking sizes III & IV (Prior to Oct. ‘92)
 
 
Advantages  

 

 


 
Eliminate Downtime-They Don’t Stick
Normal air valves can stick or jam and cause start-up problems because of their inability to handle accumulations of dir, dust, oil or water in air lines. Not with the Ceram valve. There’s no gap between the plates for dirt and oil to accumulate. The plates are finished so precise that they act like sliding magnets or jo blocks. Solenoid operators of the same voltage on standard valves are interchangeable between all sizes, reducing spare parts inventory and downtime.

They Work Great in Normal Applications Too
Just because they are so popular in harsh environments, don’t think they won’t work great in a more normal application.

Ceram Valves Save Air and Money
The tight shut-off with Ceram valves eliminates costly loss of air that is common in other designs. Compressed air that you pay for.

Extended Life
Years of proven field service verifies an anticipated life of 150 million cycles even under adverse conditions.

Overcomes Design Limitations of Other Valves
Lapped spool valves normally have a small gap between spool and sleeve that is prone to oil and dirt accumulation, resulting in sticking and the waste of air. Packed spool valves using elastomer seals are subject to deterioration and excessive wear when contamination and/or incompatible lubricants are present.

 

World Standard ISO Mounting  
ISO 5599/1 mounting dimensions mean that wherever you send it, it’s interchangeable with other ISO valves. Four basic valves sizes - ISO 1 through 4 with subbases or manifolds with NPT or ISO G (BSPP) ports.
 
 
Valve Sizes/Specifications  
Valve Size Ports
NPT, ISO G(BSPP)		 CV S.C.F.M.*
Size 1 1/4", 3/8" 1.1 40 SCFM
Size 2 3/8", 1/2" 2.4 86 SCFM
Size 3 1/2", 3/4" 4.3 155 SCFM
Size 4 3/4", 1" 7.5 269 SCFM

*Flow measured with 87 psi (6 bar) supply pressure and 14.5 psi (1 bar) pressure drop across the valve.
 
 
Features  
  • Ceramic plates guaranteed for life of valve
  • Sliding ceramic plates form seal
  • Operates with or without line lubrication
  • Interchangeable with other ISO valves
  • Expected service life exceeds 150 million cycles
  • NEMA 4 Standard
  • Sub-bases and manifolds available 1/4" thru 1" NPT ISO G1/8 to G1 piping
  • Wide range of accessories, including sandwich speed controls and regulators
  • Explosion-proof and intrinsically safe solenoids available.
  • Brad Harrison® Connector Solenoids
  • U.L. and C.S.A. approved solenoids
  •