Pedal Assist Sensor Ebike Easy Crank Installation Pas Sensor Kt D12 Bike

• Installation location: At the left crank of the electric bicycle, there are two types: SM Plug and waterproof Plug
• Double Hall sensor:Built-in dual Hall sensors, the signal is more sensitive and stable, There is a signal light on the sensor, which will flash red every time a magnetic spot passes by.
• Parameters: If the magnetic dot does not work, you need to adjust the parameters of the display (adjust according to the correct parameters in the display manual). If you are using a KT display of the same series, please adjust the parameters from C1 to 7
• Simple installation: D12 pedal assist sensor adopts a split design, which can be installed without removing the crank, and is fixed with a steel ring
• Intelligent recognition: When the pedal rotates forward, the signal will increase as the cadence increases. When the pedal rotates backward, the PAS will not accept the signal, which is safer and more intelligent
• We are committed to creating a good shopping experience. Your satisfaction is our ultimate goal. We can also accept DIY custom service, if you have related needs, you can leave me a message. Any other questions, free to contact us. We will reply you within 24 hours.