Solar Charge Controller 30A 12V 24V Auto IP67 Waterproof Max PV 100V Solar Panel Charger Regulator Kit for Sealed Gel Flooded Lithium User (MPPT 30A+MT50+RS485)
Specification
| Item model number | MPPT 30A+MT50+RS485 |
| Display Type | LED |
| Brand | EPEVER |
| Country of Origin | China |
| Style | MPPT 30A+MT50+RS485 |
| Voltage | 24 Volts (DC) |
| Package Dimensions | 7.95 x 6.38 x 5.67 inches; 4.1 Pounds |
| Manufacturer | EPEVER |
6.38 inches x 7.95 inches x 5.67 inches. Weight: 4.1 lb
Item Description
- EPEVER MPPT Solar charge controller 30Amp IP67 Waterproof kit (Tracer7810BP+MT50+RS485 Cable) 12V/24V Auto identifying system voltage, Max.PV(Voc) 100V, solar panels Max input power 390W charging for 12V battery system or 780W charging for 24V battery system,Common Negative Grounding. Plug and play kit, convenient parameter adjustment, real-time display of working status and data
- Support battery types: Lead-acid (Sealed(Default), Gel, Flooded); Lithium (LiFePO4 , Li-NiCoMn) and User-defined. Lithium battery self-activating and low temperature protection function, Compatible with AGM batteries too, User mode allow to set your parameters by Remote Meter MT50. Battery temperature compensation function, Real-time energy statistics function.
- Maximum conversion efficiency of 98% . Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99%. Ultra-fast tracking speed and guaranteed tracking efficiency , Accurately recognizing and tracking of multiple power points. Wide MPP operating voltage range.
- With RS-485 communication bus interface and Modbus communication protocol. Monitor and set the parameters via remote meter MT50 or WiFi/BLE adapter by APP(Solar Guardian) or PC software. LED indicators dynamically status working condition and trobluesshooting. Multiple load control working modes: Manual mode ; Light ON/Off ; Light ON +Timer ; Real-time Control mode.
- IP67 waterproof degree, Gel-potted design for better heat dissipation, Long lifespan design. Widely used for various applications, e.g. solar RV, camping, household system and industrial field monitoring, traffic signal, solar street light, solar garden lamp, Boats, yachts etc.
Product Description
EPEVER 30Amp MPPT Solar Charge Controller Waterproof ( Tracer7810BP+MT50+RS485) kit ,12V/24VDC auto work ,Max PV 100V , Common negative grounding . Suitable for Lead-acid & Lithium batteries & User type
Technical Data:
- Model: Tracer7810BP + MT50 + RS485 Cable
- Rated charge and discharge current :30 Amp
- Nominal system voltage:12V/24V DC auto identify (Manually select system voltage for lithium battery)
- Max. PV input power: 390W charge for 12V battery system or 780W charge for 24V battery system
- Max. PV open circuit voltage:100V(at minimum operating environment temperature) ;92V(at 25℃ environment temperature)
- Grounding : Common negative
- Battery type : Lead-acid battery: Sealed(Default), Gel(AGM), Flooded ; Lithium battery: LiFePO4, Li-NiCoMn ; User .
- Battery input voltage range : 8.5～32V
- MPP voltage range:V(BAT+2V)～72V
- Tracking efficiency : ≥99% , Max. conversion efficiency :98%
- Temperature compensation coefficient: -3mV/℃/2V (Lithium battery don’t have temperature compensation coefficient)
- Working environment temperature : -40℃～+50℃
- Self-consumption: ≤13mA(12V);≤11.5mA(24V)
- Enclosure: IP67
- Recommend wire size: 10AWG(6mm2) ;
- Dimension: 153.3*105*52.1mm ; Weight :1.26 KG
Package List:
- 1 X MPPT Solar Charge Controller 30Amp (Tracer7810BP)
- 1 X Remote Meter (MT50)
- 1 X Communication cable (CC-RS485-RS485-150U-4LLT)
- 2 X Manual (English)
EPEVER Tracer-BP series MPPT charge controller is Glue waterproof design , same functions as Tracer-AN series and added Features :
- Tracer-AN could only support Load Working Mode : Manual mode ; Light ON/Off ; Light ON +Timer . Tracer-BP could also support Real-time Control mode .
- IP67 waterproof degree.
Note :
Our local warehouse located in Chicago, Illinois, US. our professional engineer local team supply solar system help for you in time .
Product Features :
- Adopt high quality components of ST,IR and Infneon, make sure product using lifespan
- Wide working environment temperature
- Apply to lead-acid battery and lithium battery, Lithium battery self-activating and low temperature protection function
- Maximum conversion efciency of 98%, Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efciency no less than 99%, Ultra-fast tracking speed and guaranteed tracking efciency ,Accurately recognizing and tracking of multiple power points
- PV power limitation function
- Monitoring and setting parameter via MT50 or APP or PC software with RS485 communication interface
- Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better , the RS485 connector can provide power supply
- Aluminum housing for better cooling
- Real-time energy statistics function
- IP67 waterproof degree, Long lifespan design
Electronic protections
- PV Over Current ; PV Short Circuit ; PV Reverse Polarity
- Battery Reverse Polarity; Battery Over Voltage; Battery Over Discharge; Battery Overheating
- Lithium battery Low Temperature; Load Overload; Load Short Circuit
- Temperature sensor break down
Load Working Mode
1) Manual Mode ; 2) Light ON/OFF(Default) ; 3) Light ON+ Timer ;
4) Real-time Control (Control the load ON/OFF time through setting real-time clock.)
NOTE: In the mode of Light ON/OFF and Light ON/Timer, the Load is turned on after 10Min. delay .
LED Indicators
Note :When the battery type is Lithium Battery , the controller do not recognize the
system voltage automatically.
Troubleshooting
Note : When it is overload or short circuit, the load have 5 times auto-recovery output
function, which each times delay respectively 5s, 10s, 15s, 20s, 25s.
Tracer7810BP +MT50+RS485
Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1.
- Battery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.
- DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .
- If there is a long distance between PV array and controller or between controller and battery, larger wires can be used to reduce voltage drop and improve performance. (Recommended wire size only for reference.)
How to monitor and program parameters for Battery？
- Via Remote Meter MT50 (Need CC-RS485-RS485-150U-4LLT communication cable )
- Via phone APP(Solar Guardian) (Accessories needed: EPEVER-BLE-RJ45-D or EPEVER-WiFi-2.4G-RJ45-D )
- PC Software download website: EPEVER official website or read in manual .
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.