Drill-In Tent Stakes with Hex Drill Adapter and Convenient Pouch Storage Bag These awesome drill-in tent stakes make the task of anchoring your camp gear down so much easier! No longer do you need to spend time hammering your pegs into the ground - simply grab your drill or impact driver and quickly and easily drill your new drill-in tent stakes into the ground, anchoring your gear in a matter of minutes! We have included a convenient pouch bag to store your tent stakes in that will take up very little room in your fully loaded car but will keep your tent stakes all in one place. FREE 13mm Hex Drill Adapter Included! INSTRUCTIONS FOR USE 1. Hold the Drill-In Tent Stake by the glow-in-the-dark head at a vertical angle to the ground. The head spins freely so as you drill into the ground, hold the head still and the stake will drill easily into the ground. 2. Once you have almost reached the ground, ensure the hook is facing towards the ground and loop your guy lines or other camping gear under the hook before drilling the remainder of the stake into the ground. 3. IMPORTANT Removal of the stakes: When removing the stakes from the ground it is important that you hold the head and pull with a small amount of pressure as you are drilling the stakes out of the ground. This is to ensure that the o-ring and washer stays in tact and does not get left in the ground.