1 in. Mpt x Fpt 90 deg Elbow Street

• ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
• ASTM D-2466 - Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
• ASTM F-1970 - Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride)(PVC) or Chlorinated Poly (Vinyl Chloride)(CPVC) systems
• Material - Schedule 40 Fittings are produced from PVC Type 1, Cell Classification 12454-B -O-rings are produced from a Buna- N (Nitrile) material
• Listings - NSF/ANSI Standard 61, Drinking Water System Components Weighted average lead content
• Not to be used in the Hot or Cold water distribution system in a dwelling Maximum Service Temperature 140°F
• Do not use fittings for compressed air or gases
• Do not test PVC piping systems with compressed air or gases
• Do not use fittings with liquids not recommended by

• Size: 1 in.
• Angle: 90 deg