60A MPPT Solar Charge Controller,12V/24V/36V/48V Auto,Max Input 150V LCD Display Regulator Intelligent Charge Controller for Sealed Gel AGM Flooded Lithium Battery
Specification
| Display Type | LCD |
| Batteries required | No |
| Product Dimensions | 7.9"L x 7.9"W x 3.16"H |
| Country of Origin | China |
| Style | 60A |
| Item Weight | 3.8 Pounds |
| Voltage | 12 Volts (DC) |
| Included Components | mppt solar charge controller |
| Brand | POWLAND |
| Manufacturer | EASUN POWER |
7.9 "h x 7.9 "h x 3.16 "h. Weight: 3.8 lb
Item Description
- 60A MPPT charge controller: 4-level battery charging algorithm for fast, efficient, safe charging (batch charging, boost charging, float charging and equalizing), 60 Amp rate charging current.
- High Efficiency:Powland solar controller applied the latest optimized MPPT technology to quickly track the max power point of the PV array in any environment and obtain the max energy of the solar panel in real-time, PV Utilization ≥99% Max Efficiency ≥98.1%
- Multiple Protection:Solar Charger Regulator 12V/24V/36V/48V Auto.Powland MPPT 60A solar controller with short circuit protection, open-circuit protection, reverse protection, over-load protection. Intelligent MPPT algorithm improves system efficiency and three-stage charging optimizes and prolongs the life span of the battery.
- Wide Battery Compatibility:Compatible for PV systems in 12V, 24V, 36V and 48V, maximum charging current up to 60A; Support a wide range of lead-acid batteries including flooded, AGM, GEL, Lithium-ion batteries
- LCD Display: With an LCD screen and 4 buttons, it’s convenient for a dynamic display of system data and operating status.Could be widely used for various applications, e.g. solar RV, Solar household system etc.
Product Description
1 PROTECTION 2 EFFICIENCY POINT TRACKING 3 BATTERIES COMPATIBLE
1 CHARGING MODE 2 MPPT CONTROLLER SETUP 3 LCD AND FUNCTION KEY
60A MPPT Solar Charge Controller Warm Tips:
- Solar controller link order: first connect to battery; then connect to PV array; finally connect to load appliance.
- Don't connect inverter, wind, alternator charger into the charge controller! Please connect the solar controller to the battery.
- If solar PV input voltage lower 3V or lower than batteries’ voltage. It may be appears to have been discontinued.
- Parameter Setting:Floating voltage > Low voltage reconnect > Low voltage discharge.
- When controller makes buzzing because the controller dissipate heat. It will be stop when temperature return to normal.
- Don't let the positive (+) and negative (-) terminals of the battery touch each other.
| System Voltage | 12/24/36/48/Auto |
| Auto Temperature Compensation | -3mV/2V/ºC |
| Overcharging Protection | 36VSystem(48V) /48V System(64V) /12V System(16V)/24V System(32V) |
| Battery Voltage Automatic | 12V System(DC8.7V-DC15.5V);24V System(DC16V -DC31V);36V System(DC33V -DC41V);48V System(DC42V -DC64V) |
| Max PV Input Power | 900W/12V(PV voltage DС20V-DC150V);1800W/24V(PV voltage DС37V-DC150V);2600W/36V(PV voltage DС50V-DC150V);3200W/48V(PV voltage DС72V-DC150V) |
| Max PV Input Voltage | 150 Voc |
| PV Utilization | ≥99% |
| Limited Current Protection | 60A |
| Max Efficiency | ≥98.1% |
| Size | 7.91in*7.91in*3.16in |
| Net Weight | 1.72Kg |
-
Precautions before using a POWLAND MPPT 60A solar controller ?
Users should first connect the battery before connecting the solar panel for the solar controller to function properly.Otherwise, it may cause irreversible damage to the controller.
-
Why is there no voltage displayed after I connect the solar panel?
It may be caused by low voltage. When connecting the PV, it is necessary to ensure that the PV voltage is 1.5 times higher than the battery voltage.
-
Why does my controller display a current of Zero?
When the battery is in float charging state or the solar panel is damaged, the charging current is problly to be less than 1ah. When the charging current is less than 1Ah, the charging current is displayed as ZERO.
-
What you can get when you buy a POWLAND MPPT solar controller?
MPPT Controller*1;User Manual*1;3M Sticker*1;External Temperature Sensor*1
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.