3500Lbs Power Tongue Jack A-Frame Electric Trailer Jack with Waterproof Cover for Camper, Rv,Travel,Boat,Cargo Trailer,12V DC, 2 Leds,18" Quick Lift,Black
Specification
| Item model number | 38-944017 |
| Item dimensions L x W x H | 27.17 x 4.9 x 4.27 inches |
| Product Dimensions | 27.17 x 4.9 x 4.27 inches |
| Bulb Type | LED |
| Vehicle Service Type RV, Campers, Truck, Tractor, Trailer | Material Alloy Steel |
| Item Weight 17 Pounds | Minimum Height 27.11 Inches |
| Brand | LCyindu |
| Load Capacity | 3500 Pounds |
| Style | Tongue Jack |
| Item Weight | 17 pounds |
| Color | Black |
| Lift Type | power |
| Exterior | Painted |
| Special Features | Extendable |
| Manufacturer | NTZ |
| Manufacturer Part Number | TG0105D0002 |
| Model | 3500lbs |
| Size | 3500lbs |
4.9 inches x 27.17 inches x 4.27 inches. Weight: 17.0 lb
Item Description
- πͺγπππππππ ππ ππππ ππππππππ γAre you tired of turning the handle to raise and lower your trailer? Instead of a manual jack, you can try an electric trailer jack.This electric tongue jack is equipped with a built-in 150W low-maintenance electric gear motor, which can quickly lift 10 inches within 50 seconds.The heavy duty RV electric power tongue jack has a maximum load-bearing capacity of 3500lbs and a maximum stroke of 18 inches.
- πͺγπ«πππ π³π¬π« πΎππππππ π³πππππγOn both sides of the head motor of the electric jacks for trailers, there is an LED light installed on each side. The electric camper jacks has red switch to control the light, making it convenient for night-time operation and use.
- πͺγπ¬πππ ππππππππππππ πππ πΊπππγConnect the red positive lead to the positive terminal of the battery and connect the black ground wire to negative terminal of the battery.The electric A-frame trailer jack has an over load protection to shut off power that will auto reset in 15 seconds. WARNING: When using an extension wire, DO-NOT use smaller than #10 gauge wire.
- πͺγπ«ππππππ πππ π¨π ππππππππγThe trailer jacks is made of heavy-duty steel, with galvanized interior and adjustable footboard. The surface is treated with spray coating, which effectively prevents rust and extends the service life. It is equipped with 6-inch diameter quick extension feet, and the height can be adjusted between 27.11-50 inches. The inner tube diameter is 2 inches, the O.D. is 2.25 inches, working voltage is 12V DC, with a working current of less than 30A.
- πͺγπΎππ π π¨ππππππππππγThe electric trailer tongue jack is fit for any A-frame trailer, RV, travel trailer,5th wheels,boat, cargo trailer,car hauler,utility trailer and camper.The 3 bolt electric trailer jack can be manually operated and comes with a socket that can match a regular household wrench. First, remove the dust cover on the top of the jack, then insert the wrench into the inspection hole and tighten the drive screw.
- NOTE:Reasons and measures for not starting when the switch is pressed for the first time or when it has not been used for a long time: The electric trailer jack's internal motor needs to be restarted. The trailer jack needs to start from its lowest point requiring a considerable instantaneous current. It is recommended that the jack be raised 0.1 inch using a hand crank while allowing the current to be above 30A.
Product Description
Package List:
- 1 * electric A-Frame Jack
- 1 * socket
- 3 * lock washers
- 3 * Bolt
- 3 * Hex Nut
- 1 * instruction manual
- 1 * Waterproof Cover
ABOUT PRODUCT
Specification :
Vertical Load: 3500 lbs. continuous over full stroke with 5000 instantaneous tongue breakaway capacity.
The lock washers are designed to penetrate the paint on the backing plate to provide direct metal-to-metal contact for grounding purposes.
- Material:Heavy-duty Steel
- Maximum Travel Distance: 18 Inches
- Retracted Height:27.11 Inches
- Inner Tube Diameter: 2 Inches
- Outer Tube Diameter: 2.25 Inches
- Height Range:27.11-50 Inches
- Approximate Weight: 17 lbs
EASY INSTALLATION
1.Block the wheels and support the trailer β³Aβ³ frame securely.
2.Remove the existing jack.
3.Install the Electric Tongue Jack using original nuts and bolts. Align the motor head so that the motor housing is facing the front of the βAβ frame.
4.Connect the red positive lead to the positive terminal of the battery. Connect the black ground wire to negative terminal of the battery.
MOTORIZED OPERATION
1.Block trailer wheels securely.
2.The 3500 pound tongue jack for rv is operated by means of the Toggle Switch located under the motor housing.
3.Extend the jack by holding the Toggle Switch in the Extend position.
4.Retract the jack by holding the Toggle Switch in the Retract position. The jack is now fully retracted.
DUAL LIGHTS
On both sides of the head motor, there is an LED light installed on each side. The red switch controls the light, making it convenient for night-time operation and use.
EXTENDED LEGS
Drop leg fixed with a locking pin.The distance between each hole is 38mm, 6-inch diameter quick extension feet
MOUNTING PLATE
Unit of Measure: mm
Inner Tube Diameter: 2 Inches
Outer Tube Diameter: 2.25 Inches
Product Specifications
| Vertical Load: | 3500 lbs. continuous over full stroke with 5000 instantaneous tongue breakaway capacity. |
| Material: | Heavy-duty Steel |
| Maximum Travel Distance: | 18 Inches |
| Retracted Height: | 27.11 Inches |
| No-load current: | 4A |
| Maximum current: | 35A |
| Removable Foot Pad: | 6" |
| Operating Voltage: | DC 12V |
| Motor Power: | 150W |
| Drop Leg Height: | 6" |
| Power Supply Wire: | 7ft,14AWG |
| Lift Speed: | 10"/50s |
| Height Range: | 27.11-50 Inches |
| Approximate Weight: | 17 lbs |
MANUAL OPERATION
1.Remove twist cap in the access hole. (located top center of the housing cover)
2.Insert the 11mm deep well socket (included) in the access hole, over the drive spindle tang. Rotate the socket clockwise to retract and counter clockwise extend.
3.When complete, remove socket and replace twist cap, and reassemble the fuse connection.
NOTICE
1.The diameter of the outer tube of your chosen jack, will need to match the existing hole size, or you will need to modify the hole diameter to fit.
2.Failure to block trailer wheels securely could result in personal injury and possibly death.
3.The motor will stall if jack reaches the full extent of travel both in retract and extend directions. There is an over load protection for the jack to shut off power that will auto reset in 15 seconds. After using jack, operator should learn the travel limit stops. The operator should stop the jack before reaching the travel limit.
4.If the motor should stall with the jack in the fully retracted position, and the Toggle Switch is not released, the motor will automatically switch off.
Return Policy
β’ We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
β’ Returns will be voided if the product is mishandled or physical damaged by customer.
β’ Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
β’ Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
β’ All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
β’ Please contact us before returning.
Feedback
β’ We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
β’ Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.