Bundle of Red Lion Pumpworks 1/2 HP, 7.4 GPM, 115/230 Volt PWJET50 Cast Iron Shallow Well Jet Pump, Black, 97080501 and 30-50 PSI M4 Low Pressure Pump Protection Cut-Off Switch, 640134
Specification
| Style | PWJET50 with Low Pressure Cut-Off Switch |
| Power Source | Corded Electric |
| Color | Black |
| Brand | Red Lion |
| Material | Cast Iron |
| Maximum Flow Rate | 7.4 Gallons Per Minute |
| Voltage | 2.3E+2 Volts (AC) |
(n/a)
Item Description
- 1/2 HP SHALLOW WELL JET PUMP: can draw up to 7.4 GPM; ideal for cottages or homes with one bathroom; design for wells down to 25 feet
- COMES WITH M4 TYPE LOW PRESSURE CUT-OFF SWITCH: running a pump without water can severely damage a pump; this switch automatically shuts pump off when pressure decreases 10 PSI which prevents the pump from running dry
- BUILT TO LAST: RUGGED cast iron casing and volute for long life; glass-filled thermoplastic impeller and diffuser for durability
- DUAL VOLTAGE: runs on either 115 or 230 volts; voltage must be selected to match incoming power source; CSA listed in the USA and Canada; certified for potable water
- SPECIFICATIONS: 1/2 HP, 6.6 Amps at 115V; 3.3 Amps at 230 V; 1-1/4-inch FNPT intake; 1-inch FNPT discharge; 7.4 GPM at 30 PSI (5-ft. suction lift); Maximum pressure = 63 PSI; Maximum head = 145-ft
The PumpWorks shallow well jet pump from the makers of Red Lion products is ideal for small homes or cottages with one bathroom and wells down to 25-feet deep. This pump includes a factory pre-set 30/50 pressure switch producing up to 50 psi with automatic shut-off. 15/230 Volt motor is factory set for 230 Volts but can easily be changed to 115-Volts - follow the instructions in the owner's manual. Please ensure the voltage on the pump matches the power source voltage otherwise the pump will not operate at full power. This bundle also comes with the Low Pressure Cut-of Switch (Part # 640134). The Red Lion 640134 Low Pressure Cut-off Switch is designed to protect your pump from running dry. If the water level in the well runs too low, the pressure will drop, this switch detects a drop in the water pressure and turns the pump off when the pressure falls by approximately 10 PSI. Running a pump dry can severely damage a pump, melting the impeller, which prevents the impeller from turning. This can cause the motor to burn out. Protect your investment! Allow your well time to recover. To reset the pump, prime the pump and hold the lever down manually until the pump kicks in. This switch is equipped with 1/4-inch female NPT threading at the bottom of the unit and attaches easily to the pump or the piping.
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.