Rain Drip R567DT Drip Watering Vegetable Garden Kit
The Raindrip Watering Kit for Vegetable Gardens makes it easy for any level gardener to set up a drip system. Get strong, vibrant gardens with easy-to-use components to water plants for optimal growth and overall health. The all-in-one kit includes 50 ft. of dripline (the first 15 ft. without drippers carries the water from faucet to plants); oe GPH non-pressure compensating drippers spaced 12 in. apart & swivel adapter to connect to faucet; 10 galvanized steel stakes, & end plug to seal the end of the line. Forget hand watering with hose; save time and water with drip for a better way to water. Drip irrigation systems are easy to customize, install, and operate. The Raindrip Watering Kit for Vegetable Gardens features OE in. dripline, also known as a dripperline, with a 0.170 in. internal diameter (ID) and 0.250 in. outside diameter (OD), preassembled with non-pressure compensating emitters which can vary in water flow based on length of tubing or elevation, with higher flows closer to the water source. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money.
- Get started with drip irrigation with a kit that contains all the essentials you need to slowly water the soil around your plants for complete root zone hydration; Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows; use the kit to set up a drip irrigation system on its own, or to expand on an existing drip irrigation system
- Connect the swivel adapter preassembled on the dripline to faucet or hose bibb; position dripline near plants and stake down with included stakes; Non-Pressure Compensating Drippers have a oe GPH flow rate
- Use with a pressure regulator connected to the ¾ in. FHT X OE in. adapter to reduce water pressure to a manageable flow rate for drip irrigation
- Kit contains everything you need to get started and installs in three steps: 1) Connect the adapter on the dripline to the water source; 2) Lay out the dripline; and 3) Stake down to hold dripline in place near your plants
- Kit Includes: 50 ft. of OE in. tubing/dripline preassembled with ¾ in. FHT adapter; (10) hold-down stakes; (1) end plug
- All fittings and drippers assembled in one easy unit, so no assembly required: just attach to water source and lay out tubing as needed
- Built-in 1/2 GPH drippers are spaced every 12 inches for precision watering
- Spigot fitting and plug are attached: no extra pieces needed, kit also includes 10 metal stakes for precise and secure placement
- System is easily expandable using additional Raindrip products
- Encourages better growth, higher yields, and uses less water than traditional methods