1X D4N-024DC RELE ITALIANA Plug-in Power Relay 24VDC 4-Pole Changeover 6A 250V AC

Ready to Ship

30-Day Return

1 Unit of D4N-024DC RELE ITALIANA Plug-in Power Relay 24VDC 4-Pole Changeover 6A 250V AC

Sofitrek Product Disclaimer
Nature of Goods:
All products offered by Sofitrek are surplus items. These products may originate from older batches, series, or have earlier date codes compared to those currently provided by the original manufacturers or their authorized dealers.
Non-Affiliation:
Sofitrek operates independently and is not an authorized distributor, nor is it affiliated or associated with the manufacturers of the products sold. Consequently, Sofitrek does not represent the manufacturers of these products in any capacity.
Exclusion of Manufacturer's Warranty:
Since Sofitrek is not an authorized distributor, the original manufacturer's warranties are explicitly not applicable to the products sold. This includes any implied warranties of merchantability or fitness for a particular purpose.
Firmware and Software:
Some products may include pre-installed firmware or software. However, Sofitrek does not guarantee the presence, compatibility, or the revision level of such firmware or software as suitable for your specific application. Furthermore, Sofitrek expressly disclaims any representation regarding your right or ability to download, obtain, or install any firmware or software for the products from any source, including the original manufacturers or their distributors.
Limitation of Liability:
Sofitrek shall not be held liable for any form of damages—direct, indirect, incidental, consequential, or otherwise—arising from the use, misuse, or inability to use any product sold. This includes, but is not limited to, damages for loss of profits, goodwill, use, data, or other intangible losses. The buyer assumes all responsibility for the safe and lawful use of the product and agrees to indemnify and hold harmless Sofitrek against any claims, liabilities, or expenses related to the product's use.
Compliance and Responsibility:
The buyer is solely responsible for adhering to all terms of any End-User License Agreement or similar documentation related to the products, particularly concerning the obtaining, installation, and use of firmware or software.

By purchasing from Sofitrek, the buyer acknowledges having read, understood, and agreed to this disclaimer in its entirety.
Specification
Model D4N-024DC
Type Plug-in Power Relay
Coil Voltage 24V DC
Contact Form 4-Pole Changeover
Contact Rating 6A 250V AC
Contact Configuration 4-Pole Changeover
Coil Current (DC) 38 mA
Coil Resistance (DC) 640 Ω
Rated Power 1.6 VA @ 50Hz, 1.4 VA @ 60Hz, 0.9 W (DC)
Power Rating (AC1) 1.5 KVA
Max Instantaneous Current 24A
Single-Phase Motor Load 1/3 HP
Rated Voltage 250V AC
Max Switched Voltage 400V AC
Minimum Voltage 5V AC
Min Switched Load 300 mW
Min Switched Current 5 mA
Initial Resistance Max. 100 mΩ
Contact Material Ag90%-CdO10%
Insulation Resistance >10,000 MΩ
Dielectric Strength (Coil/Contacts) 2,500V RMS
Dielectric Strength (Adjacent Contacts) 2,500V RMS
Dielectric Strength (Open Contacts) 1,500V RMS
Dielectric Strength (Ground/Live Parts) 2,000V RMS
Operate Time Max 13 ms
Release Time Max 8 ms
Bounce Time Max 7 ms
Pollution Degree / Insulation Voltage (4 pole) 2 / 250V AC (EN 61810-1)
Environmental Protection RT I (dust protected)
Enclosure Classification IP40
Mechanical Life Expectancy 20 million operations
Electrical Life Expectancy 100,000 operations
Max Operating Frequency (No Load) 18,000 ops/hour
Max Operating Frequency (Rated Load) 1,200 ops/hour
Operating Temperature (AC) -40 to +55°C
Operating Temperature (DC) -40 to +70°C
Storage Temperature -40 to +85°C
Vibration Resistance 5g (10-150 Hz)
Shock Resistance (NO/NC) 10g / 5g
Min Creepage Distance (4 pole) 3.2 mm
Min Insulation Clearance (4 pole) 1.6 mm
Overvoltage Class (4 pole) II
Impulse Withstand Voltage Peak (4 pole) 2.5 KV
Type of Duty Continuous
Minimum Mounting Distance on PCB 5 mm
Max Soldering Time 5 sec
Max Soldering Temperature 270°C
Mounting Position Any
Weight 35 grams

Shipping Policy

Our go-to options for small to medium items are USPS Ground Advantage and USPS Priority Mail, known for their reliable tracking and peace of mind.

Smaller items might qualify for USPS First Class Mail. Contact us to discuss this option before purchasing.

Note: This method is less recommended due to the potential for delays.

Return Policy

We offer a 30-day return policy, no questions asked. If you choose to provide a reason for the return, it will assist us in improving and fix the issue.

Packaging

Our items are packaged according to their needs—some in ESD bags with pins secured in protective sponge, others in foam-enclosed boxes. For larger quantities, options include broken tubes for transistors or cartons. We welcome your suggestions for packaging preferences.