Stainless Steel Oil Transfer Pump 220V 1500W
Rate of
flow:0-160L/min
Inlet pipe diameter:42mm
Outlet pipe diameter:32mm
Speed:12000 RPM/min
Power:1500W
Voltage:220V
Current:5.5A
Lift:3-10M
Scope of application:
304 stainless steel tube is suitable for all kinds of neutral corrosive liquids.
|
Power |
Applicable liquid |
|
750W |
Edible oil, sewing machine oil, hydraulic oil, diesel oil, water, wine, kerosene and other diluted liquid and medium viscosity liquid |
|
1500W |
Glycerin, oil, detergent, gear oil, edible oil, sewing machine oil, hydraulic oil, diesel oil, water, wine, kerosene and other diluted liquid and medium and high viscosity liquid |
Note:
1, When the
operation, should be on your feet, hands clasped tools and auxiliary
joystick, prevent tool from the reaction of | up the risk of damage.
2, During operation, please place the power cable at the end of the tool
to prevent the power cable from being wound by the rotating part of the
tool.
3, In the use of abnormal noise, should be immediately shut down, check
the cause, until trying to eliminate the rear can continue to use.
4, The pump should not be empty operation, use suction immediately stop
the pump, otherwise it will wear out, universal joint impeller, serious
damage to the pump pipe.
5, Replace the brush: brush worn out to can not be used should be
replaced immediately, otherwise it will damage the commutator, serious
will burn out the motor.