Dayton Audio's unique DAEX25X4-4 exciter assembly employs an array of four
separate exciters coupled together with a frame. This combined motor strength
actuates an area larger than what conventional exciters can drive, resulting in
higher power handling and more output.
Key Features
Pre-applied 3M™ VHB™ adhesive for quick, secure installation
Four 24 mm voice coils improves power handling to 40 watts RMS
Rare-earth neodymium motor and proprietary voice coils
Easy 8 ohm load, can be powered by most amplifiers
The Dayton Audio exciter assembly's unique design uses four 25 mm exciters
coupled to a plastic frame to actuate a larger area with more force than
conventional designs. This array of exciters is wired in a series-parallel
configuration for an overall impedance of 8 ohms and power handling of up to 40
watts RMS.
The DAEX25X4-4 exciter features the same ability to turn nearly any surface
into a speaker as other exciters and tactile transducers do, only with a larger
contact area and moving mass that increases energy transfer. Perfect for use in
walls, drop ceilings, or even cabinet doors.
To ensure maximum acoustic energy transfer between the transducer and the
surface to which it is attached, 3M VHB (Very High Bond) adhesive is
pre-applied... just peel and stick! Connection is made with 10" wire leads to
keep installation and wiring as simple as possible.
Specifications:
• Power handling: 40 watts RMS
• VCdia: 4 x 25 mm
• Nominal impedance: 8 ohms
• Re: 7.3 ohms
• Le: 0.29 mH
• Fs: 285 Hz
• Dimensions: 7.5" W x 7.5" H x 0.75" D
• Weight: 240 grams.
Product Specifications
Application Full-Range Exciter
Power Handling (RMS) 40 Watts
Impedance 8Ω